ODM/Patent Products
Industry news
-
Basic introduction of steering knuckle
The steering knuckle is one of the main parts on the steering axle of the car, which can make the car run stably and sensitively transmit the driving direction. The function of the
steeri...2021-08-21
-
Cooling stage of plastic injection molding
In plastic injection molding tools, the design of the cooling system is very important. This is because the molded plastic product can only be cooled and solidified to a certain rigidity, and then the...
2021-08-13
-
Pressure holding stage of plastic injection molding
In the pressure holding stage of plastic injection molding, its function is to continuously apply pressure, compact the melt, and increase the density (densification) of the plastic to compensate for ...
2021-08-06
-
Filling stage of plastic injection molding
Filling is the first step in the entire injection cycle process. The time starts from when the mold is closed and the injection is started until the mold cavity is filled to about 95%. In theory, the ...
2021-08-04
-
About material selection of wheelie bin axle
The selection of shaft parts materials is mainly determined according to the strength, rigidity, wear resistance and manufacturing process of the shaft, and strives to be economical and reasonable.
2021-07-31
-
Rearview mirror bracket pasting operation guide
The first step is to wipe clean the adhesive area of the front windshield.
The second step is to clean the surface of the base, and evenly spread the base glue on the glued surface.
2021-07-28
