ODM/Patent Products
News
-
The design and production process of the plastic injection mold
Injection molding is a manufacturing process for producing parts by injecting molten material into a mold. Plastic Injection Molding is one of the most frequently used manufacturing processes for crea...
2021-09-02
-
After plastic injection molding, what are the factors that affect the cooling rate of the product?
After plastic injection molding, it is mainly the wall thickness of the plastic product. The greater the thickness of the product, the longer the cooling time. Generally speaking, the cooling time is ...
2021-08-27
-
Basic introduction of steering knuckle
The steering knuckle is one of the main parts on the steering axle of the car, which can make the car run stably and sensitively transmit the driving direction. The function of the
steeri...2021-08-21
-
Cooling stage of plastic injection molding
In plastic injection molding tools, the design of the cooling system is very important. This is because the molded plastic product can only be cooled and solidified to a certain rigidity, and then the...
2021-08-13
-
Pressure holding stage of plastic injection molding
In the pressure holding stage of plastic injection molding, its function is to continuously apply pressure, compact the melt, and increase the density (densification) of the plastic to compensate for ...
2021-08-06
-
Filling stage of plastic injection molding
Filling is the first step in the entire injection cycle process. The time starts from when the mold is closed and the injection is started until the mold cavity is filled to about 95%. In theory, the ...
2021-08-04
